Ten Things You Learned In Kindergarden Which Will Aid You In Obtaining Saab 93 Key Fob

How to Replace a Saab 9-3 Key

The Saab 9-3 is a great car that is full of appeal for drivers. It has a powerful engine as well as excellent visibility. saab 9-3 key not accepted contact service has a high safety rating.

However, it is important to ensure that you have at minimum two working keys for your car. It could be costly to replace a key if you lose it.

How to Replace the Ignition Key in a Saab9-3

If your car's keys won't turn in the ignition it is time to replace it. This guide will teach you how to replace the ignition key on the Saab 9-3. You will need a replacement key and a new battery that can be reprogrammed, and a new key-fob case.

Contrary to earlier models, modern Saab vehicles use an electronic transponder inside the key-fob instead of a physical key to unlock and start the vehicle. The reprogrammable batteries that are in the key-fob eventually wear out, and they aren't able to hold any charge. This is especially when you keep using the same key with the same lock.

The good news is that it can be replaced quite easily by a professional locksmith. You can also do it yourself if you have the appropriate tools and a bit of patience. The first step is taking the key-fob off. This is accomplished by inserting a flathead screwdriver into the slot located in middle of the case. You will need to work slowly, since the plastic is extremely thin and easily damaged.

Once the case is opened, you can make the new key by combining lower portion of the old key along with the transponder and banana. This will ensure that the new key is linked to the CIM properly, which can make all the difference when replacing the sole key for your Saab 9-3.

How do I replace the ignition Key on a Saab 900

If you don't have two keys, you will need to remove the steering wheel and dashboard to gain access to the ignition. Start by disconnecting the negative battery cable. After the battery has been disconnected, it is possible to remove all the trim pieces as well as dashboard pieces that surround the steering wheel. After the dashboard is taken off, you can push a screwdriver through the opening behind the ignition switch and pull it out.

The ignition cylinder is equipped with a key lock which could prevent the vehicle from starting if it doesn't have the key inside it. If your 900's ignition switch isn't functioning, check the key to see whether it's in the lock or snared into the barrel of ignition. It is also recommended to rotate your keys and keep them clean to avoid bending.





Saab cars differ from other vehicles in that they don't make use of traditional metal keys. Instead, the car can recognize the electronic signals from the key fob by a specific chip inside it.

If you lose just one working key fob your dealer will charge a premium to replace your computer module (also called the CIM). We can reprogram the EEPROM on your computer to make it accept new keys, without having to replace it. This can save you more than 50% of the cost the dealer charges! This is the SAAB KEY PROGRAM. Find out more about it here!

How to replace the ignition Key on a Saab 9-5

The metal portion of the classic Saab keys is easy to duplicate and does not present a major threat to vehicle theft. The real protection is the electronic component that's in the key fob, which has a chip inside that can recognize your vehicle when it's inserted into the ignition switch.

Saab has relied on the technology of this anti-theft system for over a decade. It's not as efficient as a physical lock for your door but it does make stealing your car a lot harder. Every Saab owner must keep an extra Saab key in their car.

The majority of new Saabs come with two keys. However, they can be added at a dealer using a special handheld device known as Tech-2. Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this is the NG 9-3 models, with more modern, newer features that require the use of a key-fob.

The dealer will replace the CIM or TWICE module of those cars if the keys are lost. They'll charge you top dollar for the process. We can reprogram your computer's EEPROM to accept new keys without replacing expensive modules.

How to Replace the Ignition Key on the Saab XC90

If your SAAB 9-3 key fob begins having issues turning the barrel of the lock It could be the time to replace it. Fortunately, the process is rather simple and doesn't need you to visit an agent. Instead you can complete the process yourself at home with only a few tools.

First, you'll need to make the keys for your new car. Before you start, disable the anti-theft by placing blocks under your rear wheels, and then releasing your handbrake. Insert the key in the ignition, and then turn it to the "on" position. This will activate the accessories, but it will not start the engine. Repeat this five times, and then leave the key in the "on" position.

Next, you'll need to get a replacement case for your old key fob. These are available at most auto parts stores and are typically extremely affordable. Depending on the model, you may even purchase them without electronic components.

To open the case, gently push the screwdriver with a flathead into the slot in the middle. The case will break easily and, once you have it, you'll be able to gain access to the internal electronics. To take the electronics out, employ a small screwdriver and try prying them out in a gentle manner.